Products
| Adchem 500 | Adchem WH-Saw 500-2 | Adchem Soluble Tap Tuff#2 | Adchem Machine & Sump Cleaner | Adchem Spray Kool A | Kool Grind - RG | Polytek LB |

Hyllyer CNC Machining Center performing heavy face milling operation in C1020 steel.

ADCHEM 500
Metal working lubricants are used for drawing, forging, cutting, sawing, grinding, and general machining. D&I Can lubricants prevent rust and is a cleaner.

Heavy duty soluble oil combines the good features of a compounded cutting oil with those regular emulsions to produce a fluid with maximum cooling ability, excellent lubricity and antiweld properties. It offers a high degree of emulsion stability, corrosion protection, control of rancidity, resistance to foaming and protection from serious staining of nonferrous metals.

Soluble oil is an excellent, economical corrosion preventive for short term protection of metallic surfaces. It is recommended for use in either as a water emulsion or without dilution. For cleaning, use a hot alkali solution, then rinse with water. It has no sulphur, phosphorus, zinc salts, nitrites or nitrates.

Soluble oil can be diluted to a much greater extent than can general purpose emulsifying oils, thus lowering cutting fluid costs. At all dilutions, its emulsions remain homogenous, even in hard water, and an effective antifoam agent controls foaming when soft water is used. It can be used for machining nonferrous metals without serious staining or corrosion resulting.

Recommendations
Each specific combination of metal machinability, tool set-up, feed, and speed dictates its own optimum dilution ratio. In general, the richest dilutions range from (oil to water) 1:15 to 1:30 for most difficult jobs. Free machining steels and other materials with high machinability ratings commonly use emulsions of 1"30 to 1:50. Because grinding usually requires maximum coiling with less emphasis on lubrication, dilution ratios of 1:60 to as high as 1:80 yield excellent results in both finish quality and length of wheel life.

ADCHEM WH-Saw 500-2

• Is a heavy duty lubricant formulated specifically for difficult sawing operations. It can also be used for drawing, forming, stamping and gun drilling.
• It substantially enhances tool and blade performance in your most demanding operations. Excellent extended blade life has been reported by plants using Adchem WH-Saw 500-2.
• Can be used as is or diluted with water for desired concentration depending on the difficulty on the operation.
• It contains extreme pressure lubricity additives - rust and corrosion inhibitors.
• It is available in 6 gallon pails, 55 gallon drums and 330 gallon tote bins.